regupol-euromax-logo

REGUPOL sonusclips

REGUPOL products are regarded as engineering solutions with acoustic properties, developed as construction materials. They are tested with actually applied screed, rather than a prefabricated slab, which results in slightly lower but significantly more realistic decibel values. This is important when selecting a material and for the correct interpretation of technical specifications.

For soundproofing of walls and ceilings

REGUPOL sonusclips are designed to reduce airborne and impact sound transmission in wood, steel, or concrete structures—for both interior walls and ceilings. These innovative clip systems are used to fasten gypsum board (GWB) to walls and ceilings, allowing the panels to move freely and absorb energy thanks to the resilient rubber isolators, resulting in increased acoustic performance regarding airborne and impact noise.

Both REGUPOL sonusclip SC100 and REGUPOL sonusclip DE90 have a design load of 16 kg per isolator and can support up to two layers of 15 mm gypsum board at a spacing between fastening points of no more than 600 x 1,200 mm on center.

By request only

REGUPOL sonusclip DE90

REGUPOL sonusfit c-series is a gym flooring system that offers planning freedom and the possibility for individually tailored solutions. The series provides maximum flexibility in the acoustic design of floor constructions. Solutions can be individually adapted to the specific construction project and aligned with the desired target frequency. It is possible to implement both mass-spring systems with wet screed and dry screed—one of the most effective methods for isolating low-frequency impacts in fitness studios. In combination with the corresponding surface systems REGUPOL sonusfit t-series or REGUPOL sonusfit m-series, the energy that the elastically supported screed must absorb is reduced, thereby protecting the screed while maintaining the sports-functional properties of the flooring.
View product

By request only

REGUPOL sonusclip SC100

REGUPOL sonusclip SC100 is a resilient sound isolation clip designed for fastening gypsum wallboard to interior walls and ceilings. The clip is designed to reduce airborne and impact sound transmission and can be used in wood, steel, and concrete structures. Each clip has a design load of 16 kg and can support up to two layers of 15 mm gypsum board when the spacing between clips is no more than 600 × 1,200 mm.
View product